Enhanced comfort and efficiency in room automation

There are strict requirements for a cutting edge room automation system. All trades in a room like light, shading, heating, cooling, ventilation, multimedia etc. have to be capable of communicating and shall have a consistent user interface. Therefore all room automation components have to be integrated into a system and an overall energy efficiency concept.

ROOM4D - Automation equipment

ems4.ENO1B

Communication interface for the integration of EnOcean

The bi-directional gateway module ems4.ENO1B acts as an interface for EnOcean-compatible sensor and actuator modules. Using this module, it is possible to process data from wireless sensors (e.g. temperature sensors, luminance sensors, room operating units, window contacts etc.) in the ems4/ems2 system.

R4D.2L/2J/4L/4J-55

EnOcean Radio Switch (55x55mm), compatible with switch programmes of several manufacturers

The EnOcean radio switch (55x55mm) is an universal and extremely flat radio switch insert with a maintenance-free, self powered radio transmitter.

R4D.2L/2J/4L/4J-BJ-...

EnOcean Radio Switch (BJ), compatible with switch programmes of Busch-Jaeger

The EnOcean radio switch (BJ) is an universal radio switch insert with a maintenance-free, self powered radio transmitter.

R4D.AHKF

EnOcean Radio Outdoor Light Sensor

Wireless light sensor for blind systems. Can also be used to control light at sunset. Designed for integration into an EnOcean network.

Measuring range: 0...510 Lux, 0...1000 Lux (10 Bit), 0...1020 Lux, 300...30.000 Lux (Standard), 600...60.000 Lux

R4D.AO-1 | R4D.AO-2

EnOcean Radio Receiver with 1 or 2 analogue outputs

The EnOcean radio receiver R4D.AO-... has one or two analogue 0...10 V outputs. The R4D.AO-... works as dimmer. The relevant control signal can either come directly from the radio switches of series R4D.2L/2J/4L/4J.. or from the EnOcean communication interface ems4.ENO1B.

R4D.ATF

EnOcean Radio Outdoor Temperature Sensor

Battery- and wireless radio outdoor sensor for temperature and ventilation control. The radio outdoor sensor transfers the current temperature to the EnOcean communication interface ems4.ENO1B in cyclical intervals. With integrated temperature sensor and solar energy storage for maintenancefree operation.

Measuring range: Temperature: -20...+60 °C, configured via airConfig

R4D.BW-LS

EnOcean Radio Ceiling Multi Sensor 360°

The radio ceiling multi sensor R4D.BW-LS is designed for motion detection and brightness measurement in living and office spaces. Transmission to the EnOcean communication interface ems4.ENO1B is carried out by means of radio telegrams according to the EnOcean standard.

Measuring range: Range of Illumination: 0...510 Lux, Action: 360°

R4D.DO-B

EnOcean radio switch receiver lighting 230V for radio pushbutton

The EnOcean radio actuator R4D.DO-B is equipped with a digital output for the control of light bulbs, HV halogen lamps, electronic ballasts and inductive loads. The respective control signal can either come directly from the radio switches of series R4D.2L/2J/4L/4J or the EnOcean communication interface ems4.ENO1B.

R4D.DO-J

EnOcean radio - switch receiver blind 230V for radio pushbutton

The EnOcean radio receiver R4D.DO-J is equipped with two digital outputs for the control of blinds, roller shutters or other 3-point actuators. The respective control signal can either come directly from the radio switches of series R4D.2L/2J/4L/4J or from the EnOcean communication interface ems4.ENO1B.

R4D.FG1

EnOcean Wireless Window Handle

Batteryless window handle for status monitoring of windows (optionally lockable) with EnOcean technology. When actuated, the handle transmits a radio signal with the handle position to an actuator or centrel control unit in order, for example, to activate an energy lock.

R4D.FK1

EnOcean Radio Window Contact

Battery-less radio window contact for status monitoring of windows and doors. Provides a reduction in energy consumption through demand-driven heating and cooling.

R4D.FSM-USB

EnOcean Feldstärke-Messinstrument USB Transceiver und Software

R4D.FSM-USB consists of an EasySens USB transceiver and a software, that converts your notebook or Windows tablet into a field strength measuring device. It helps integrators to measure frequency ranges and/or to find the right location for wireless EnOcean receivers.

R4D.KCS1

EnOcean Radio switch for access cards

The R4D.KCS1 is a battery-free radio switch for room access cards. Occupancy-dependent control of lighting or air-conditioning in rooms.

R4D.RC01 / RC02 / RC03 / RC04

ROOM4D Room operating device/controller with integrated CAN bus interface

R4D.RC01 / RC02 / RC03 / RC04 are room operating devices/controllers with an embedded CAN bus interface for integration into the room automation network. R4D.RC01 and RC02 have operating elements on the front of the device. R4D.RC03 and RC04 are not equipped with operating elements. For the purpose of room temperature control, the R4D.RC01 and RC03 are equipped with two digital outputs (0 V / 24 V DC) which can be controlled either switching or pulse-width modulating (PWM). The R4D.RC02 and RC04 are equipped with two analogue outputs (0...10 V DC). Additionally, the devices have four digital inputs which can be assigned special functions (for example, a window contact).

R4D.RC05 | R4D.RC06

ROOM4D Room operating device/controller with integrated data bus interface and multi-function display

R4D.RC05 and RC06 are room operating devices/controllers that control two valve outputs for room temperature regulation. The R4D.RC05 has two digital outputs for this purpose (0 V / 24 V) to open and close the valves. The R4D.RC06 is provided with two analogue outputs, 0...10 V for continuous control. The valves are controlled via a supervisory automation station (AS) or by an integrated heating and cooling PI controllers. The R4D.RC05/RC06 measures the room temperature using an integrated temperature sensor for room temperature control. The R4D.RC05/RC06 has two digital inputs apart from the 2 outputs. These can be assigned optionally to switches, buttons or special functions (for example, a window contact).

R4D.REP-3

EnOcean Radio Repeater

The repeater serves for signal amplification between EnOcean sensors and receivers.

R4D.RT7

ROOM4D Room operating unit / touch panel with integrated ethernet/BACnet interface

The R4D.RT7 is a multi-function touch-screen terminal, which can be programmed and configured as desired - based on the feature required.

Operating elements:
■ Technology: TFT with LED backlight
■ Diagonal: 4.3“
■ Ratio: 16:9
■ Resolution: 480x272 pixel
■ Colours: 16 bit (65.536 colours)
■ Brightness: 350 cd max. brightness control
■ Contrast: 300:1
■ Viewing angle: 75/75/75/45°
■ Touch panel: 4-wire resistive, non-reflective 3H hard coat surface

R4D.RTF

EnOcean Funk-Raumtemperaturfühler

Battery- and wireless radio room sensor for temperature and ventilation control. Dependent on events, the radio room temperature sensor transfers the present values to the EnOcean communication interface ems4.ENO1B in cyclical intervals.

R4D.RTF-CO2

EnOcean Radio Room Sensor CO2/Temperature

The sensor R4D.RTF-CO2 is designed for the detection of carbon dioxide (CO2) and temperature in living spaces.

R4D.VSA1

EnOcean wireless radiator valve actuator for room temperature control

Battery-free wireless valve actuator for single room control.